TruForm Bevel Profiling Tool M14
£92.36
£92.36
Product Description
The top guide in stainless steel allows you to work keeping the wheel perfectly aligned with the slab. The bottom bearing guarantees a consistent and even shape.
For smooth operation both bearings work independently. The highest quality diamonds are used to ensure optimum results and a long lifespan.
Used wet, we’d expect 100 linear meters of cut on marble before replacement is required.
Must be used under 4500rpm, with a ideal speed of circa 2000rpm material dependent.
A number of bevel sizes available.
If you’re looking for a tool with which to shape 20mm thick porcelain tiles or sandstone paving, our sintered profiling tool is more appropriate and much longer lasting.
Stone profile
Diamond Profile
Vacuum Brazed Profile
You may also like…
-
GD-SAITAC-VEL Abrasive Velour backed paper Silicon carbide discs for use with a 125mm velcro backer pad.
-
MD-SAITAC Abrasive plain backed paper Silicon carbide discs for use with a 125mm backer pad and spray adhesive.
-
Foam backed diamond hand polishing pads. Ideal for final finishing of all natural stone. Also good for taking the sharp edges off glass, ceramic and porcelain. The 50# through 400# pads are electroplated diamond The 800# through 3000# are resin bonded diamond. The set of 7 comprises one pad of each grit.
-
Identical to our foam backed diamond hand pads, just without the foam. Ideal for final finishing of all natural stone, perfect for wrapping around your finger to finish drainer grooves or those awkward to reach tight spots. Also good for taking the sharp edges off glass, ceramic and porcelain.