Bushboard M Stone Max Top or Howdens Quartz Diamond Blade
From: £14.22 +VAT
From: £14.22 +VAT
Product Description
We offer two blades:
At 150mm this is our Premium Fine Turbo Blade with a standard 22.23mm bore and fitted with a reducing ring to 20mm. This is designed as an economy blade and has a lifespan of approximately 10 linear metres in Bushboard. Effectively this blade will cut enough material for a single kitchen installation.
At 160mm this is a specially designed Turbo Blade with a standard 22.23mm bore and fitted with a reducing ring to 20mm. This is our professional blade that has a lifespan in excess of 50 linear metres in Bushboard. Designed for the professional kitchen fitter looking for a longer lasting product. Also supplied to Howdens under product code TLS1050
The 160mm is also ideal for use in the Flex CS60 wet saw (with the reducing ring removed) for cutting 30mm thick man made Quartz worktops.
We also offer replacement router tools for the Bushboard fitting kit.
Blade Use
Do not try and cut the workpiece in a single pass, particularly with the Pro Blade, if you do you’ll find the blade will want to deflect or wander off line.
Cutting in two or three passes at a depth of 6mm to 7mm each pass removes this issue and actually speeds up the cutting process.
Bushboard Worktops
Bushboard Cutting Tools
Diamond Cutting Blade
You may also like…
-
Foam backed diamond hand polishing pads. Ideal for final finishing of all natural stone. Also good for taking the sharp edges off glass, ceramic and porcelain. The 50# through 400# pads are electroplated diamond The 800# through 3000# are resin bonded diamond. The set of 7 comprises one pad of each grit. -
For cutting blade sharpening -
Vacuum brazed diamond router bits for cutting and installation of Bushboard and Max-Top Quartz. These are alternative style parts for the fitting kit currently available from Bushboard but rather than Electroplated diamond these are vacuum brazed. The effect is extended lifespan by approximately ten times. These tools have been predominantly tested on CNC machines and can be used as a straight replacement for the Bushboard electroplated tools on CNC equipment.